How to read a ruler

Follow the pictures step by step: what each little mark on a ruler means, then how to read a measurement. Then try it yourself with the guided lesson and practice.

How to read a ruler, step by step

1 Find the inch lines

11/161/83/161/45/163/87/161/29/165/811/163/413/167/815/162
One inch of the ruler, blown up. The long lines with numbers are whole inches.

The longest lines, the ones with numbers, are the whole inches. Between two numbers is one inch, and every inch on the ruler looks exactly the same. Once you can read one inch, you can read all of them. The marks in between split that inch into smaller pieces, and the next steps show each kind.

2 The half inch: the longest mark in between

11/161/83/161/45/163/87/161/29/165/811/163/413/167/815/162
The 1/2 mark is the longest line between two inch numbers, right in the middle.

Halfway between the inch numbers is the longest of the in-between marks. It is the half inch, 1/2". If the end of what you are measuring lands on it, the reading is the inch number and a half, like 1 1/2".

3 Quarter inches: the next longest marks

11/161/83/161/45/163/87/161/29/165/811/163/413/167/815/162
The quarter inch marks: 1/4 and 3/4. Together with the 1/2 they split the inch into four.

Halfway between the inch line and the half inch is the quarter inch, 1/4". Halfway between the half and the next inch is 3/4". These are the next longest marks. The half inch is also 2/4, so the quarters go 1/4, 2/4 (1/2), 3/4.

4 Eighths: the short marks

11/161/83/161/45/163/87/161/29/165/811/163/413/167/815/162
The eighth inch marks: 1/8, 3/8, 5/8 and 7/8.

Shorter again are the eighths: 1/8", 3/8", 5/8" and 7/8". They sit halfway between the quarter marks. The even eighths already have simpler names: 2/8 is 1/4, 4/8 is 1/2 and 6/8 is 3/4.

5 Sixteenths: the shortest marks

11/161/83/161/45/163/87/161/29/165/811/163/413/167/815/162
The sixteenth marks: 1/16, 3/16, 5/16 and so on to 15/16.

The shortest marks are the sixteenths: 1/16", 3/16", 5/16" and so on up to 15/16". With these, the inch is split into 16 equal pieces. Every mark on the inch is some number of sixteenths, which is why counting sixteenths always works.

6 Read a measurement: start, count, simplify

11/161/83/161/45/163/87/161/29/165/811/163/413/167/815/162123456
Start at the 1 line. Count the little marks to the arrow: 6. Six sixteenths is 3/8, so the reading is 1 3/8".
  1. Start at the last inch number before the end of what you are measuring. Here that is 1.
  2. Count the little marks from that line to the end: 6. That is 6/16.
  3. Simplify: if the top number is even, halve both numbers until it is odd. 6/16 becomes 3/8.
  4. Put them together: 1 3/8 inches. You can check it: the arrow is right on the 3/8 mark.

7 Measure from the zero line

1234INCHES
The blue bar starts at the 0 line and ends at 3 7/16".

Line the start of what you are measuring up with the 0 line, not the very end of the ruler. Some rulers start a little in from the edge. Then read where the other end lands: here it is past the 3 and 7 marks further, so 3 7/16". If the end of your ruler is worn, start at the 1 inch line and take 1 inch off the reading.

Reading a metric ruler

1 Centimetres and millimetres

41234567895mm
One centimetre, blown up. The numbered lines are centimetres; each small mark is 1 millimetre.

On the metric side, the numbered lines are centimetres. Each centimetre is split into 10 millimetres by the small marks. The slightly longer mark in the middle is 5 mm, half a centimetre.

2 Read a metric measurement

41234567895mm1234567
Start at the 4 cm line (40 mm). Count the marks to the arrow: 7. The reading is 47 mm, or 4.7 cm.

Start at the last centimetre number (4 cm is 40 mm), count the millimetre marks to the end (7), and add them: 47 mm. The same length can be written 4.7 cm. No fractions to simplify on the metric side.

3 The same reading at normal size

12345678910cm
47 mm at normal size, the way you will see it.

This is the same 47 mm at normal size. The 5 mm marks help you count quickly: 47 is two marks past the 5 mm mark after the 4.

Start here: a 3-step lesson

Try it yourself

Slide the blue bar along the ruler and watch the reading change.

Tips for accurate readings

Practise reading a ruler

Practice this tool Print a free worksheet

Questions

How many 16ths are in an inch?

Sixteen. Half an inch is 8/16, a quarter is 4/16 and an eighth is 2/16.

How do I read centimetres on a ruler?

Each number is a centimetre and each small line is a millimetre. 4 cm plus 3 small lines is 43 mm, or 4.3 cm.

What is the difference between a ruler and a tape measure?

They are read exactly the same way. A tape is longer and flexible, and its numbers keep counting past 12 inches.

What if my ruler starts a little in from the end?

Measure from the 0 line, not the physical end of the ruler.

Sources

Measure Drill checks every number against these references or works it out from the exact definitions of the units.