Bolt torque chart
Inch bolts, foot pounds
| Size | Grade 5 dry | Grade 5 oiled | Grade 8 dry | Grade 8 oiled |
|---|---|---|---|---|
| 1⁄4-20 UNC | 8 | 6 | 12 | 9 |
| 1⁄4-28 UNF | 10 | 7 | 14 | 10 |
| 5⁄16-18 UNC | 17 | 13 | 25 | 18 |
| 5⁄16-24 UNF | 19 | 14 | 27 | 20 |
| 3⁄8-16 UNC | 31 | 23 | 44 | 33 |
| 3⁄8-24 UNF | 35 | 26 | 49 | 37 |
| 7⁄16-14 UNC | 49 | 37 | 70 | 52 |
| 7⁄16-20 UNF | 55 | 41 | 78 | 58 |
| 1⁄2-13 UNC | 75 | 57 | 106 | 80 |
| 1⁄2-20 UNF | 85 | 64 | 120 | 90 |
| 9⁄16-12 UNC | 109 | 82 | 154 | 115 |
| 9⁄16-18 UNF | 121 | 91 | 171 | 128 |
| 5⁄8-11 UNC | 150 | 113 | 212 | 159 |
| 5⁄8-18 UNF | 170 | 127 | 240 | 180 |
| 3⁄4-10 UNC | 267 | 200 | 376 | 282 |
| 3⁄4-16 UNF | 297 | 223 | 420 | 315 |
| 7⁄8-9 UNC | 429 | 322 | 606 | 455 |
| 7⁄8-14 UNF | 474 | 355 | 669 | 502 |
| 1-8 UNC | 644 | 483 | 909 | 681 |
| 1-12 UNF | 704 | 528 | 995 | 746 |
Metric bolts, newton meters
| Size | 8.8 dry | 8.8 oiled | 10.9 dry | 10.9 oiled |
|---|---|---|---|---|
| M5 x 0.8 | 6 | 5 | 9 | 7 |
| M6 x 1 | 11 | 8 | 15 | 11 |
| M8 x 1.25 | 25 | 19 | 36 | 27 |
| M10 x 1.5 | 50 | 38 | 72 | 54 |
| M12 x 1.75 | 88 | 66 | 126 | 94 |
| M14 x 2 | 141 | 105 | 201 | 151 |
| M16 x 2 | 218 | 164 | 312 | 234 |
| M18 x 2.5 | 312 | 234 | 431 | 323 |
| M20 x 2.5 | 441 | 330 | 610 | 457 |
| M22 x 2.5 | 601 | 451 | 831 | 623 |
| M24 x 3 | 761 | 571 | 1053 | 790 |
A guide, not a spec. When an engine, vehicle or equipment maker gives a torque, use theirs. Never reuse torque to yield bolts. N·m × 0.7376 = ft·lb.
Questions
How much torque for a 1/2-13 Grade 5 bolt?
About 75 ft·lb dry or 57 ft·lb oiled. Grade 8 is about 106 ft·lb dry.
How were these values worked out?
The clamping force is set to 75% of the bolt's proof load, then torque = K × diameter × clamp force, with K = 0.20 for clean dry steel and 0.15 for oiled threads.
Why is oiled torque lower?
Oil reduces friction, so the same torque stretches the bolt more. Using the dry value on oiled threads can overload the bolt.
How do I tell a Grade 5 from a Grade 8 bolt?
Count the lines on the head: 3 lines is Grade 5 and 6 lines is Grade 8. Metric bolts have 8.8 or 10.9 stamped on the head.
More free charts
Sources
Measure Drill checks every number against these references or works it out from the exact definitions of the units.
- Machinery's Handbook (Industrial Press), drill, thread and fastener tables
- NIST Special Publication 811, Appendix B: Conversion factors



